YUBIKEY 5C NFC ENGRAVER

18.0 × 45.0 mm · design → clip → export @ true scale

drag move · wheel scale · alt+wheel rotate · arrows nudge 0.1mm (⇧=1mm) · del remove
dashed = clip boundary · orange art = clipped (won't engrave)

FRONT · ENGRAVED PREVIEW

BACK · ENGRAVED PREVIEW

Selected Layer

Nothing selected — click a layer on the key or in the layer list.

Clip Mask

Border

Hole clear

Pad clear

Clearances are added around the keyring hole and touch pad. All values in mm. Pad clearance applies to the front only.

▸ calibrate key geometry (mm)

Width W

Height H

Hole Ø

Hole Y

Pad Ø

Pad Y

H is the engraveable body height (excludes the USB connector). Hole/Pad Y are measured from the bottom edge of the engraveable body — everything stays aligned to the engraving area as you adjust it. Measure with calipers, then re-check the dashed clip lines.

Export

Resolution

Mirror back-side export Include body outline (alignment)

PNG is written at true physical scale (DPI embedded) — canvas is exactly the key's real size. Black = engrave, white = skip. Import into LightBurn / LaserGRBL and it lands at real size.

Sticker (Cricut)

Sticker

Exports the active side (FRONT) as a die-cut sticker: your clip-mask shape becomes the cut line, including the keyring hole and touch pad cut-outs. SVG has the printed design plus a red cut path — in Cricut Design Space, flatten the image layer and set the red path to Cut. PNG is the same artwork at true scale for print-then-cut.

Project

View on GitHub ↗

Author: Stephen Eaton · v