CAM Software & Post Processors

CAM Software is required to generate the required gcode for the machine to work with via a machine specific post-processor.

Generic GRBL post processors normally work with some modification around how arcs are handled.

Fusion 360

I've since moved away from using F360 due to the changes in their licensing, however I've had good success with these post-processors in the past.

• https://github.com/MarkHedleyJones/OmioCNC-Postprocessor
• https://brainright.com/wp-content/uploads/2020/10/DDCSV11.txt

Copper Cam

Coppercam is a commercial and very affordable PCB isolation routing program that I use when I make my PCBs. I found it's much easier to use than FlatCAM.

Tool Library

Output Settings

I found the generic post works correctly with no modifications.

EstlCam v11

While I haven't used Estlcam much, I found the default post processor to work just fine with no modifications.

---

Last update: 2021-10-22
Created: 2021-10-22